English - Milwaukee HOBL 7000 Manual Original

Start
II
8 8
Stop
TECHNICAL DATA HOBL 7000
Lamp
Volts 110-240 V
Mains frequency 50-60 Hz
Power input < 62 W
max. Terminal Block Ampacity 30 A
Weight with power cord 3,8 kg
Weight without cable 3,2kg
Luminous flux 7700 lm
Colour rendering index 70
Colour temperature 4000 K
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY WARNINGS LAMP
The light has to be installed and maintained by a qualified
specialist.
Electric installations may only be completed complying with the
national and provincial safety regulations.
For the connection, a VDE-certified connection line (at least
H07RN-F 3G1,0) must be used.
LED lights are extremely bright. Please never look directly into the
light.
Make sure that the fixing point capacity is more than 3 times of the
light weight.
SPECIFIED CONDITIONS OF USE
Luminaire for use in Rooms or parts of buildings for temporary use.
Do not use this product in any other way as stated for normal use.
ASSEMBLY AND CONNECTION TO POWER SUPPLY
Before the installation, always switch off the voltage
supply!
Lead the connection line through the intended cable
entry.
Connect the cables to the screw terminal according page 4 (N
= blue cable, = green/yellow cable, L1 = brown cable).
(Tightening torque 1,8Nm)
Several lamps can be connected together.
Please observe the following limits.
Fuse maximum number of lamps
230 V
10A 25
16A 43
110 V
10A 10
16A 18
MAINTENANCE
If the external flexible cable or cord of this luminaire is
damaged, it shall be exclusively replaced by the
manufacturer or his service agent or similar qualified
person in order to avoid a hazard. The light source contained in this
luminaire shall only be replaced by the manufacturer or his service
agent or a similar qualified person.
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on
the label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Please read the instructions carefully before starting
the machine.
Do not stare at operating lamp.
This tool is only suitable for indoor use. Never expose
tool to rain.
Always disconnect the plug from the socket before
carrying out any work on the machine.
Caution! Risk of electric shock
Do not dispose of electric tools together with household
waste material.Electric tools and electronic equipment
that have reached the end of their life must be collected
separately and returned to an environmentally
compatible recycling facility. Check with your local
authority or retailer for recycling advice and collection
point.
The light source and the control
device cannot be exchanged.
LED LED
This product contains a light source of
energy efficiency class E.
L E
D
European Conformity Mark
British Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark

English

GB
9 9