BFT LEO B CBB DL2 3 230 L02 Manual De Instrucciones página 41

Ocultar thumbs Ver también para LEO B CBB DL2 3 230 L02:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
CH logic= 0 - Control con gured as Start E. Operation according to STEP-BY-STEP MOV. logic. External start for tra c light control.
CH logic= 1 - Control con gured as Start I. Operation according to STEP-BY-STEP MOV. logic. Internal start for tra c light control.
CH logic= 2 - Control con gured as Open.
The command causes the leaves to open.
CH logic= 3 - Control con gured as Closed.
The command causes the leaves to close.
CH logic= 4 - Control con gured as Ped.
The command causes the leaf to open to the pedestrian (partial) opening position. Operation according to STEP-BY-STEP. logic
Logica CH= 5- Control con gured as STOP.
The command performs a STOP
CH logic= 6 - Control con gured as AUX0. (**)
The control activates the AUX0 output
CH logic= 7 -
Not used
CH logic= 8 -
Not used
CH logic= 9 - Control con gured as AUX3. (**)
The control activates the AUX3 output
CH logic= 10 - Control con gured as EXPO1. (**)
The control activates the EXPO1 output
CH logic= 11 - Control con gured as EXPO2. (**)
The control activates the EXPO2 output
(**) Active only if the output is con gured as Monostable Radio Channel, Courtesy Light, Zone Light, Stair Light, Bistable Radio Channel or Timed Radio Channel.
TABLE "C" RADIO MENU RADIO
Logic
Description
Add 1ch Key
add 1ch
associates the desired key with the 1nd radio channel command.
Add 2ch Key
add 2ch
associates the desired key with the 2nd radio channel command.
Add 3ch Key
add 3ch
associates the desired key with the 3nd radio channel command.
Add 4ch Key
add 4ch
associates the desired key with the 4nd radio channel command.
Erase List
WARNING! Erases all memorized transmitters from the receiver's memory.
erase 64
Eliminates individual radio control
Removes a radio control (if clone or replay is disabled) To select the radio control to be deleted, enter the position or press a button on the radio
erase 1
control to be deleted (the position is displayed)
Read receiver code
Displays receiver code required for cloning transmitters.
INSTALLATION MANUAL
Radio channel control con guration
LEO B CBB DL2 3 230 L02-LEO B CBB DL2 3 120
F02-LEO B CBB DL2 3 120 F02 PHOT USA16
41
-

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Leo b cbb dl2 3 120 f02Leo b cbb dl2 3 120 f02 phot usa16

Tabla de contenido