Getting Started; Charging The Battery - ION Adventure Manual Del Usuario

GETTING STARTED

Charging the Battery

The embedded 1200mAh Li-Polymer Battery in the Adventure camera can be
recharged quickly allowing you hours of recording time.
To charge the battery
1. Charge your camera through the USB cable connected to a USB2.0 computer
port, the AC adapter (included) on wall socket power, DC Car adapter
(included) or any 5V 1A AC/DC adapter.
2. The LED indicator lights RED when the camera is charging.
3. The Red LED will turn OFF once the battery is fully charged. It takes about 2
hours to initially charge the camera. Subsequent charges take approximately
2 hours.

When the battery power is low, the camera will vibrate three times to indicate
the low battery.

The camera will vibrate for 2 seconds to indicate it's out of power. The camera
will automatically save the file if it is recording and turn off.

If the camera does not charge, please contact our help line for assistance as
you should not attempt to remove the internal battery. Doing so, will void your
warranty coverage and can possibly damage the camera.
www.ioncamera.com
12
EN -