Connecting Camera To A Computer; Running The Ion Software - ION Adventure Manual Del Usuario

Please ensure you install and lock the PODZ correctly before using the camera to
avoid water damage. Failure to properly seal your camera can result in leaks that
damage or destroy your camera. Your warranty does not cover water damage
resulting from user's misuse or neglect.
1. Attach the PODZ to the back of the camera and rotate clockwise until the dots
are aligned as the picture.
2. Slide the latch on the PODZ to lock it.

CONNECTING CAMERA TO A COMPUTER

Running the iON Software

The camera is Plug & Play compatible with Windows & Mac for connection as a
mass storage device, allowing you to easily transfer photo/video files to the
computer. Run the on board iON Application Software to change the camera's
settings.
Both the Windows iON.exe and Mac iON_mac.app Software Application come
installed on the camera.
1. Turn the camera on.
2. Connect the camera to a Mac or Windows computer USB 2.0 port using the
USB cable.
3. If you are a windows user, three new Removable Devices will be added to MS
Windows "Computer". Open the drive named "ION (X)" and find iON_win.exe,
double click it to run the app;
(The letter "X" depends upon what other devices are already attached to your
computer.)
www.ioncamera.com
25
EN -