Standby Mode; Vox Mode - miniland baby digimonitor 2.4 plus Manual De Instrucciones

day; the hour or minutes; or finally the 12 or 24-hour time format.
5. Press UP key to increment or press DOWN
6. Press key to confirm the date.

5.2.9.2.2. STANDBY MODE

With the Standby mode you can choose the maximum time the monitor image remains active (1,
3 or 5 minutes); after this time the image disappears but the sound continues to be heard in order
to save energy. To reactivate the image, just press the Power key (12).
To activate this mode you should:
1. Press the Menu/Back
2. Press the UP key or DOWN
key enter into the sub-menu.
3. Press UP or DOWN
the sub-menu.
4. Press UP or DOWN
5. Press key to save the setting.
6. Press the Menu/Back key twice to return to the main screen.
Note: Once you press the Power button (12) to turn on the screen again, the touch panel will be
locked. To unlock it, please, follow the steps suggested on the 5.2.2 section of this instruction
manual.

5.2.9.2.3. VOX MODE

This mode allows you to control the sound activation of your baby monitor. If you activate the
VOX mode on the monitor and there is no sound around the camera, it stops transmitting. The
monitor screen turns off when the camera is not transmitting. When the camera detects any
sound louder than the set sensitivity level it will start transmitting the signal to the monitor again.
To disable this feature and see the area monitored continuously, turn off the VOX mode on the
monitor.
· VOX mode OFF: The camera transmits continuously, allowing you to monitor your baby or the
area you wish to monitor continuously.
· VOX mode ON: The camera only transmits when it detects a sound with sufficient intensity,
according to the level selected, around the camera.
To activate this function, first of all make sure you have set the standby mode to 1/3 or 5 minutes
(see point 5.2.9.2.2). Choose 1/3 or 5 if you want your camera to stop transmitting the image
after 1/3 or 5 minutes if there is no sound around.
Once the standby time is set, to activate VOX mode, please, follow the next instructions:
1. Press the Menu/Back
2. Press the UP key or DOWN
key enter into the sub-menu.
3. Press UP or DOWN key to select VOX icon
sub-menu.
4. Press UP /DOWN
to "1" for a baby that sleeps peacefully and cries quietly and "3" if the baby tends to make noise
while sleeping or makes fairly loud noises before actually crying, or set it to "2" level if you
key and the menu will pop up.
key until the setting icon
key to select standby icon
key to select the option OFF/1min/3min/5min;
key and the menu will pop up.
key until the setting icon
key to select the VOX option: OFF/1/2/3 (default OFF). Set sensitivity
key to decrement.
is highlighted then press RIGHT
then press RIGHT
is highlighted then press RIGHT
then press RIGHT
35
ENGLISH
key enter into
key to enter into the