Setting Menu - miniland baby digimonitor 2.4 plus Manual De Instrucciones

ENGLISH
To pair the camera and the monitor follow the next steps:
1. Press the MENU/Back
2. Press the UP key or DOWN
key enter into the sub-menu.
3. Press UP key or DOWN
into the sub-menu.
4. Press RIGHT /LEFT
5. Press key to search for a camera unit. The power LED indicator (2) will begin to flash in
green.
6. While the LED indicator is flashing, press the link button on the camera (VI).
7. Once paired, the LED indicator will stop flashing and the image of the camera will show
immediately on the monitor unit screen.
8. If unsuccessful, please repeat above steps.
For various reasons you may lose the connection between the monitor and a camera which is
already connected. Should this be the case, repeat the process explained above to connect the
camera with the monitor again.
Note: Before starting the pairing process, make sure that the camera and the monitor are close
to each other.
Note 2: Each camera can be linked just with one monitor at a time.
Nota 3: If the monitor and the camera, for some reason, have left the factory without being
paired, you will have to do it manually adding the camera to channel 2, 3 or 4. You won't be able
to pair the camera again with channel 1 until you have paired it in another channel and remove
the channel 1 camera.
5.2.9.1.5. DELETE CAMERA
To delete one of the cameras connected, follow the next steps:
1. Press the MENU/Back
2. Press the UP key or DOWN
key enter into the sub-menu.
3. Press UP key or DOWN
enter into the sub-menu.
4. Press RIGHT
press the key.
Note: If you only have one camera paired to the monitor, you won't be able to remove it.
Note 2: A channel needs to be deleted before pairing to a new camera unit.

5.2.9.2. SETTING MENU

5.2.9.2.1. DATE & SETTING TIME
To set the time and date, follow the next steps:
1. Press the Menu/Back
2. Press the UP key or DOWN
key enter into the sub-menu.
3. Press UP or DOWN key to select data & time icon then press RIGHT key to enter into
the sub-menu.
4. Press the RIGHT
key and the menu will pop up.
key until the camera icon
key to select ADD camera icon
/UP /DOWN
key and the menu icon will pop up.
key until the camera icon
key to select DELETE camera icon
/LEFT /UP /DOWN
key and the menu will pop up.
key until the setting icon
or LEFT key to select the element you wish to adjust: the year, month or
is highlighted then press RIGHT
key to select the desired camera to add.
is highlighted then press RIGHT
key to select the desired camera to delete and
is highlighted then press RIGHT
34
then press RIGHT key enter
then press RIGHT key