Beper P203TER100 Manual De Instrucciones página 15

Wall Mounted Fan Heater Use instructions
Week 1-Monday
Program
P1 8:00-
17:00
P2 18:00-
07:00
P3 8:00-
17:00
P4 18:00-
07:00
P5 OFF
One more program is available, P6, which can be customized based on user's needs.
When display shows P6, it is possible to proceed with program setting:
Press W+timer key once, display shows number "1" (Monday) and word ON, it is now possible to set time when
the appliance will start on on this day.
Press the W+timer a second time, to set the hour. On the display the corresponding numbers will start blinking;
use + and – keys to set desired hour. To set the minutes, press W+timer key again, on the display the numbers
will start blinking; select the desired option by pressing + and – keys.
To set the time in which the appliance will turn off, press the W+timer key, display will show the word OFF and
the corresponding numbers will start to blink; use the + an – keys to select desired hour. Press the Wùtimer key
again to set minutes, and set the desired option by using the + an – keys.
To confirm setting, press W+timer key, at this point the number 2 (Tuesday) appears on the display; proceed as
detailed above to set on and off timer for the other days of the week.
To set the temperature, press DELAY key, display will show number 1 (Monday): use + and – keys to set the de-
sired operation temperature. Press DELAY key again, display shows number 2 (Tuesday; ): use + and – keys to
set the desired operation temperature. Proceed like this until the temperature is set for all the days of the week.
Open window function
This function activates energy saving mode, By pressing the AUTO key on remote control, the
on the display. In this mode, the appliance immediately and dynamically detects room temperature; in case a
drop of at least 3°C in less than 1 minute is detected, the appliance will automatically shut off. To turn it back on,
it is necessary to press the ON/OFF key.
To deactivate this function, press AUTO key again on remote control and make sure the
off.
Auto shut on/off function
To set auto shut on/off time, with appliance in stand by mode press the LOCK key on remote control, and then
press DELAY: display will show the indicator together with the icon I/W. At thjs point, press + or – to set the time
in which the appliance will turn on, from 01 to 24. Press DELAY again, display will show icon II/H: press + or – to
set the time in which the appliance will shut off, from 01 to 24.
Note: after pressing DELAY key, the selected indicator will blink for about 5 seconds; if no setting is
made within this time, display will stop blinking and the appliance goes back to stand by mode (press
LOCK key again to restart the setting).
Child lock
When appliance is off (but ON/OFF switch at the back is on "I" position), press LOCK key on remote control,
display will remain off, and only operation light will stay on. In this mode, appliance cannot be operated by ope-
ration switch (at the back) nor by remote control. To deactivate the lock, press LOCK key again.
2-Tuesday 3-Wednesday
8:00- 8:00-
17:00 17:00
18:00- 18:00-07:00
07:00
8:00- 8:00-
17:00 17:00
18:00- 18:00-07:00
07:00
OFF OFF
4-Thursday 5-Friday
8:00- 8:00-
17:00 17:00
18:00-07:00 18:00-
07:00
8:00- 8:00-
17:00 17:00
18:00-07:00 18:00-
07:00
OFF OFF
15
6-Saturday 7-Sun-
day
8:00- 8:00-
17:00 17:00
18:00-07:00 18:00-
07:00
OFF OFF
OFF OFF
00:00- 00:00-
24:00 24:00
icon appears
icon on display turns
EN