Beper P206VEN150 Manual De Instrucciones página 10

3in1 Touch Screen Stand Fan Use instructions
Do not use fan without base. The fan must operate standing upright.
Do not operate fan near curtains, plants, or where other objects can
get caught in the rotating blades.
To disconnect the fan, grip plug and pull from wall outlet. Never yank
on cord. Do not run power cord under carpeting; do not cover po-
wer cord with throw rugs, runners, or similar coverings. Arrange cord
away from traffic area and where it will not be tripped over.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of ex-
perience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
In order to ensure your children's safety, please keep all packaging
(plastic bags, boxes, polystyrene etc.) out of their reach.
In case of any malfunction, such as unusual noise coming from the
fan, turn the appliance off and unplug it immediately.
Use only for intended household use as described in this manual.
Any other use not recommended by the manufacturer may cause
fire, electric shock, or injury to persons. Use only attachments and/or
components provided with the fan.
If the supply cord is damaged, contact after sales service indicated in
this manual for repair or replacement.
Description of product Fig. A
1. Grills (front and back)
2. Clamping ring
3. Fan blade
4. Lock system of clamping ring
5. Control panel
6. LED display
7. Fan body fixing knob (on the back)
8. Upper column
9. Column fixing knob (on the back)
10. Lower column
11. Base
12. Base locking lever
Assembly of fan
Remove all packing materials.
Set the base on the floor. Unscrew the metal washer and locking lever from the bottom of the lower column.
Insert the lower column into the base, put the metal washer onto the black weight.
Insert the threaded end of the locking lever into the hole of the washer, and through the base, into the bottom of
the lower column. Turn the locking lever clockwise to secure and tighten the base to the lower column.
To install the fan at its maximum height, insert the upper column into the top hole of the lower column, tighten
the column securing knob.
10