SEA FIELD Manual De Instrucciones página 4

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
2.5. Insert the handle bar device into the perforated shaft (Fig.
9)
2.6. Grease plentifully the hole A and insert the leaf device
(Fig. 10)
Grease the whole with the special greaser until the
grease comes out of both sides.
A
2.7. Insert the cam of the limit switch into the handle bar and
fix it with the special screws (left-hand side mounting Fig. 11,
right-hand side mounting Fig. 12)
N.B.: During the insertion of the units lubricate them with
the supplied grease (Fig.8, Fig.9, Fig.10).
cod. 67410630
®
Fig. 9
Fig. 10
LEFT-HAND SIDE
MOUNTING
Greaser
Fig. 11
Rev 12 - 03/2011
RIGHT-HAND SIDE
MOUNTING
3. LEAF ASSEMBLING
Before installing the gate make sure that the concrete has
hardened into the foundation hole.
3.1. Position the leaf of the gate on the leaf device making
reference to the rotation axe of the leaf hinge (Fig. 13);
leaf
leaf rotation axe
3.2. Weld with care the leaf device to the leaf of the gate
realizing a tract fixation of ca. 3-4 cm along the surface of the
contact, avoiding the welding next to the threaded holes,
furthermore it is necessary to respect the perpendicularity to
the axe of rotation (Fig. 14)
ENGLISH
Fig. 12
leaf device
Fig. 13
Fig. 14
11