SEA FIELD Manual De Instrucciones página 8

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
9. RISK EXAMINATION
The points pointed by arrows in Fig. 33 are potentially
dangerous.
The installer must take a thorough risk examination to prevent
crushing, conveying, cutting, grappling, trapping so as to
guarantee a safe installation for people, things and animals
( Re. Laws in force in the country where installation has been
made. ).
Fig. 33
PERIODICAL MAINTENANCE
Grease the parts in movement
(counter-connecting rod, release, etc.)
Check the release function
Check if the screws are locked tight
Check the conditions of wear and tear of the
devices in movement
Check the correct drain of the rainwater
Check the integrity of the connection cables
All the above described operations must be made
exclusively by an authorized installer.
NOTICE
As for misunderstandings that may arise refer to your area
distributor or call our help desk. These instructions are part of
the device and must be kept in a well known place. The
installer shall follow the provided instructions thoroughly. SEA
products must only be used to automate doors, gates and
wings. Any initiative taken without SEA Srl explicit
authorization will preserve the manufacturer from whatsoever
responsibility. The installer shall provide warning notices on
not assessable further risks. SEA s.r.l. in its relentless aim to
improve the products, is allowed to make whatsoever
adjustment without giving notice. This doesn't oblige Sea to
up-grade the past production. SEA s.r.l can not be deemed
responsible for any damage or accident caused by product
breaking, being damages or accidents due to a failure to
comply with the instructions herein. The guarantee will be
void and the manufacturer responsibility (according to
cod. 67410630
®
To the attention of users and technicians
Annual
Annual
Annual
Annual
Annual
Annual
Rev 12 - 03/2011
Machine Law) will be nullified if SEA Srl original spare parts
are not being used. The electrical installation shall be carried
out by a professional technician who will release
documentation as requested by the laws in force.
quotation from the GENERAL DIRECTIONS that the installer
must read carefully before installing. Packaging materials
such as plastic bags, foam polystyrene, nails etc must be kept
out of children's reach as dangers may arise. To respect the
norms in force it is recommended to use the SAFETY GATE
system together with the electronic control unit GATE.
SAFETY PRECAUTIONS:
All electrical work should conform to current regulations. A 16
A 0,030 A differential switch must be incorporated into the
source of the operators main electrical supply and the entire
system properly earth bonded. Always run mains carrying
cables in separate ducts to low voltage control cables to
prevent mains interference.
INTENDED USE:
Field undergrounded operators have been designed to be
used only for the automation of swing gates.
SPARE PARTS:
To obtain spare parts contact:
SEA s.r.l. -Zona Ind.le, 64020 S. ATTO Teramo Italia
SAFETY AND ENVIRONMENTAL COMPATIBILITY:
Don't waste product packing materials and/or circuits.
When being transported this product must be properly
packaged and handled with care.
LIMIT OF GUARANTEE
For the guarantee see the sales conditions on the official SEA
price list.
MAINTENANCE AND OUT OF SERVICE:
The decommission and maintenance of this unit must only be
carried out by specialised and authorised personnel.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED
RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED
BY IMPROPER USE OF THIS PRODUCT.
SEA reserves the right to do changes or variations that may
be necessary to its products with no obligation to notice.
ENGLISH
This is a
15