Establishing A Direct Wlan Connection - Oase FM-Master WLAN Instrucciones De Uso

How to proceed:
On the router:
1. Press the WPS button on the router to activate WPS.
– Follow the information given in the router operating instructions.
– WPS is only active for a limited time. Activate WPS on the FM-Master WLAN during this time.
 I
On the FM-Master WLAN:
2. Insert the service pin into the opening between the two top sockets until you feel a resistance. That is the
reset button.
3. Briefly press the reset button (max. 2 seconds) to activate WPS.
– The LED is lit green and flashes fast.
– WPS remains active for approx. 2 minutes.
– The connection is established when the green LED flashes slowly (2 seconds on, 1 second off).
On the smartphone/tablet:
4. Establish a connection to the WLAN router.
5. Start the Oase FM-Master app.
6.5

Establishing a direct WLAN connection

The range of the WLAN connection between the FM-Master and your smartphone/tablet can span a distance
of up to 80 m provided there is unobstructed signal transmission and no source of interference.
• The network name (SSID)  and standard password  are
specified on the adhesive label next to the unit type plate on
the FM-Master WLAN.
• The connection is encoded and protected by a password.
– Recommendation: Change the password when starting
the unit up for the first time to prevent access to the FM-
Master WLAN by unauthorised persons.
• The last six characters of the network name (SSID) "Oase FM-Master <xxxxxx>" are specific to the unit
and are preset.
• The FM-Master WLAN has the password "oase1234" in its factory default setting. You should change the
password when starting up for the first time for reasons of security.
The symbols used may differ slightly from the symbols on your smartphone/tablet.
iOS Android How to proceed:
1. Open "Settings".
2. Select and activate WLAN/WiFi.
3. Select the desired network connection "Oase FM-Master <xxxxxx>" from the net-
work list.
4. Enter the password and select "Connect".
– The connection to the FM-Master WLAN is established.
– If the connection is successful, "Connected" (Android) or a  (iOS) will appear
under the network name.
– Other WLAN connections are deactivated.
5. Start the Oase FM-Master app.
– The app automatically selects the language used by the operating system. If the
app does not support that language, it will use English.
- EN -
37