Updating The Firmware; Displaying Unit Information - Oase FM-Master WLAN Instrucciones De Uso

- EN -
7.17

Updating the firmware

"Settings" screen
For a firmware update, the FM-Master WLAN changes to the firmware update mode and provides a new net-
work. Your smartphone/tablet has to be connected to this network for installing the update.
N O T E
Prerequisites for a malfunction-free firmware update:
Other WLAN connections to the FM-Master WLAN are disconnected.
•
The WLAN connection has a strong signal.
•
The FM-Master app is not closed during the update.
•
The power saving mode of the smartphone/tablet is deactivated.
•
The smartphone/tablet battery is sufficiently charged. The update takes up to 2 minutes.
•
The power supply of the FM-Master WLAN is not interrupted.
•
How to proceed:
1. Touch next to "FM-Master Firmware".
– The touch symbol is only displayed when an update is available.
2. Confirm the information for a malfunction-free firmware update.
– The FM-Master WLAN changes to the firmware update mode and confirms the change with an acoustic
signal.
– The FM-Master WLAN provides the network "OASE_UPDATE_xxxxxx".
– An instruction for changing the network is displayed.
3. Connect your smartphone/tablet to the network "OASE_UPDATE_xxxxxx".
4. Change to the "Settings" screen of the app and confirm the instruction.
– The update is started.
– The progress of the update is displayed.
5. After successful update, connect your smartphone/tablet to the WLAN network of the FM-Master WLAN.
7.18

Displaying unit information

"Settings" screen
Displayed information:
• App version of the FM Master App
• Firmware version of the FM-Master WLAN
Touch "Further information" to display the following information:
• Serial number of the FM-Master WLAN
• Local IP address
• IP address of the FM-Master WLAN
• Touch Product informations / FAQ
and help with problems.
50
to access the OASE website for further information about the product