Resetting The Audio Functions; Switching The Sound Muting/Attenuation; Setting The Internal Power Amplifier; Switching The Feature Demo - Pioneer DEH-P80RS Manual De Instrucciones

Section
Initial Settings
12

Resetting the audio functions

You can reset all audio functions.
1 Use MULTI-CONTROL to select
Audio Reset.
Reset OK! appears in the display.
2 Press MULTI-CONTROL.
Does it RESET? appears in the display.
3 Push MULTI-CONTROL right.
Are you sure? appears in the display.
4 Press MULTI-CONTROL to reset audio
functions.
Complete appears in the display and audio
functions are reset.
# To cancel this function on the way, press
BAND.
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! The sound is muted or attenuated, MUTE
or ATT are displayed and no audio adjust-
ment is possible.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Use MULTI-CONTROL to select Mute.
Mute appears in the display.
2 Press MULTI-CONTROL to select the de-
sired setting.
Press MULTI-CONTROL repeatedly to switch
between the following settings:
! 10dB ATT – Attenuation
66
En
Black plate (66,1)
! 20dB ATT – Attenuation (20dB ATT has a
stronger effect than 10dB ATT)
! TEL mute – Muting
Setting the internal power
amplifier
This unit features high power amplifier. How-
ever, in particular system, external amplifiers
are used instead of internal amplifier. If you
use external amplifiers in order to establish a
multi-amp system, and don't use internal am-
plifier, it is recommended to turn off the inter-
nal amplifier. Turning off internal amplifier
reduces the noise that comes from the beha-
vior of internal amplifier and fan.
1 Use MULTI-CONTROL to select
Internal AMP.
Internal AMP appears in the display.
2 Press MULTI-CONTROL to turn the inter-
nal power amplifier on.
ON appears in the display.
# To turn the internal power amplifier off, press
MULTI-CONTROL again.

Switching the feature demo

The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
1 Use MULTI-CONTROL to select
Demonstration.
Demonstration appears in the display.
2 Press MULTI-CONTROL to turn the fea-
ture demo on.
ON appears in the display.
<CRD4082-A/N>66