Braven BRIDGE Guia De Inicio Rapido página 3

ENG
BRAVEN_BRIDGE_MANUAL_v6.indd 3
TURN ON & BLUETOOTH PAIRING
1. Press the Power button for
2-3 seconds to turn on your
BRAVEN (BRIDGE). Press the
same button again for 2-3
seconds to turn your BRAVEN
off.
2. Activate Bluetooth
®
the phone or device you
are pairing with (see your
device's instruction manual for
information on activating its
Bluetooth settings).
®
3. Press and hold the Play Button
on your BRAVEN until you hear
the BRAVEN pairing sound.
4. Go to your phone or device's
Bluetooth settings and select
®
"BRAVEN BRIDGE" from the list.
5. If asked for a passcode enter
"0000"
Your BRAVEN will remember the
last 8 devices it has paired with.
on
NOTE: If your BRAVEN does
not have an active Bluetooth
connection and is left on, it will
shut itself off after 30 minutes.
To restart your BRAVEN you
will need to press and hold the
power button for 2-3 seconds.
®
5/15/15 3:09 PM