Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
Technical Information
There are some switches on the base of the telephone.
These switches set technical parameters.
Tone / Pulse
Select dialing method. Tone is normal.
Ring signal
There is two ring signal switches underneath the
telephone:
Ring volume (HI, MID, LOW, OFF)
RINGER
Ring tone (HI, MID, LOW)
RINGER TONE
Troubleshooting
Check that the telephone cord is undamaged and
properly plugged in. Disconnect any additional
equipment, extension cords and other phones. If
the problem is resolved, the fault is with some other
equipment.
Test the equipment on a known working line (e.g. at a
neighbour's house). If the equipment works there the
fault is probably with your telephone line. Please report
this to your network operator.
If you are still experiencing difficulties, contact the place
of purchase.
Publicidad
Tabla de contenido
