File Storage And Play - Nilox FOOLISH Manual De Instrucciones

b. Long press "Record" key for 3s when turning on laser light, the system will turn off the laser light;
c. The laser light turning on/off also can be operated in standby state;
d. The wireless remote control can execute laser light turning on/off operation.
Note:
The function of long pressing "Record" key for 3s to turn on/off laser light does not interfere with the setting of turning
on " Laser Synchronous Shooting" under the camera parameter setting.
14. Turn On/Off TFT Display
a. In any status, long pressing Shutter key for 3 second to turn on or off TFT display;
b. TFT display can't be turned on or off by pressing Shutter key on remote control;

File Storage and Play

 USB Cable
You can copy or cut the recorded video files to your computer via the USB cable, or remove the Micro SD card and insert
it into a card reader to read the video data. Then, you can select our software from the attached CD or such
recommended software as Media Player and KM Player to play the videos.
Note:
(1)Please turn off the FOOLISH before inserting or unplugging the USB cable.
(2)Turn the power switch to "OFF" before charging
FOOLISH . The red indicator will twinkle slowly in charging.
(3) You can directly copy or cut the recorded files to your
computer when the power switch is turned to "ON".
 HDMI and AV cable
You can also use the HDMI cable or AV cable to connect FOOLISH to a TV or monitor with HDMI interface, in order to
play the recorded files.
~ 17 ~