Stanley Bostitch SB-150SX Manual De Instrucciones página 6

JAM RELEASE - SB1664FN (FIG 13)
Warning! Always disconnect the air before clearing a jammed fastener.
Jam Clearing
Disconnect the air supply from the tool.
Relieve fasteners from pusher.
1. Depress latch button
2. With the latch button depressed, rotate the latch assembly upwards and forward until latch is on upward
position
3. Clear jam
ADJUSTING THE MULTI-DIRECTIONAL EXHAUST
To adjust the multi-directional exhaust simply rotate the exhaust deflector in a desired position as illustrated:
arrows. (Fig 14)
Technical Data:
Please look for the technical data in the table marked ? at the end of this manual.
A Length mm.
B Height mm.
C Width mm.
D Weight Kg.
E Noise L
PA
F Noise L
WA
G Noise L
PA
H Vibration m/s
I P max Bar
J P min Bar
, 1s, d
, 1s, d
, 1s, 1m
2
K Air consumption per shot @ 5.6 Bar
L Activation type
M Summer lubricant
N Winter lubricant
O O-ring lubricant
P Fastener Name
Q Dimensions mm.
R Head/crown
S Magazine capacity
T New Driver Length mm.
U Max. Depth Inside Piston mm.