auna Harper Manual De Instrucciones página 24

EN
24
Skip Mode (Skip up
1. During play or pause mode, if the skip up button
will go to next track and display the track no. and then remain the play
or pause mode.
2. During play or pause mode, if the skip down button
the current track will be played back from the beginning again, the
original track no. is displayed and the play or pause mode remains.
3. After step 2, press the skip-down button
previous track and keep the playback or pause mode.
Repeat Mode
Press the repeat button (4) during playback to select repeat function. The
single or all tracks can be played as follows:
(1) repeat 1 track
Play mode
Repeat 1 track
Repeat all tracks
Off mode
NOTES:
The device supports normal compact discs, but NOT discs in CD-MP3

format.
Due to AUX and CD were designed at the same position of this system.

When AUX IN jack (14) plugged by 3.5 mm stereo plug. The channel will
change to AUX IN automatically and CD will stop to play. Please ensure
the AUX IN jack (14) without plugged by anything before playing CD.
CD Programming
Up to 20 tacks can be programmed for disc play in any order. Before use, be
sure to press the stop button (2).
1. Set the CD mode and stop the CD playback.
2. Press the program button (9), "P" will appear and is flashing.
3. Select a desired track by pressing the skip up button
down button (3).
4. Press the Program button (9) to store the track into memory.
/Skip down )
(2) repeat all tracks
Indicator on LCD display
LED is flashing.
LED lights up.
(8) is pressed. It
(3) is pressed,
(3) again to skip to the
(3) off mode
–
(8) or the skip