How To Use; Power Supply; Removal And Attachment Of Roller Holder - Silvercrest SHE 3 C3 Instrucciones De Servicio

All manuals and user guides at all-guides.com
__NAS279064_Hornhautentferner_B9.book Seite 11 Donnerstag, 15. Dezember 2016 4:00 16
6.

How to use

• Remove all packing material.
• Check that the delivery is complete.

6.1 Power supply

NOTICE: risk of material damage
Be sure to observe the correct polarity when inserting the
batteries.
1. Slide the battery compartment lid 7 off the housing 5.
2. If necessary, replace the old batteries with new ones.
3. Slide the battery compartment lid 7 back on to the hous-
ing 5.
6.2 Removal and attachment of roller
holder
Removal
• Press the button 6 and remove the roller holder 2 upwards.
Attachment
1. Figure A: place the roller holder 2 on the top of the device
in such a way, that the cog wheels of the roller and the
device are above one another.
2. Press the roller holder 2 on to the device until it engages
audibly.
3. Check that it is secure.
11
US-EN