Kettler Classic Flyer 12 Retro Trike Instrucciones De Montaje página 4

USA Before Assembly
Assembly of the toy vehicle

Please ensure that the toy vehicle will only be used for playing when assembly has been carried out correctly, and
checked, by an adult.

The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions carefully before
beginning work. Assemble the toy vehicle in the exact sequence shown by the letters in the diagrams. This is
essential for the safe function and use of the wagon.

Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please
be careful when assembling this product.

Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around.
Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of
suffocation if children play with plastic bags!

Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts
by hand until resistance is felt, then use wrench to finally tighten nuts completely against resistance (locking device).
Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed
they no longer function correctly (the locking device is destroyed), and must be replaced.

When assembling plastic grips: The grips can be pushed onto the handlebars more easily if they are first soaked in
warm water.

Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.

For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).
Spare Parts listed at back of manual
When ordering spare parts, always state the full article number, position number, the quantity required.
Example order: Model # 8144-XXX/ position no. 2/1 piece
Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for
transportation, in the original box if possible. It is important to provide a detailed defect description / damage
report! Important: spare part prices do not include fastening material; if fastening material (bolts, nuts,
washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening
material".
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and
®
safely (local refuse sites).
KETTLER International Inc. · 1355 London Bridge Road · VA 23453 USA
®
www.kettlerusa.com
All manuals and user guides at all-guides.com