geberit UNIVERSAL Manual De Operación página 27

3
Turn the hand wheel to the right to lightly
press the parts to be welded into the plane
disc on both sides.
When surface planing on one side, the
stopper must be swivelled out so that there
is some clearance between the plane and
the empty tension device. The tension
device and the plane cannot touch each
other in this way.
18014405647374603-1 © 10-2020
996.254.00.0(07)
4
Press the start button on the handle or the
start button on the planing machine to switch
on the electric plane and keep the button
pressed.
5
Release the start button to stop surface
planing.
6
Swivel out the plane.
7
Check the fitting precision of the surface-
planed cut surfaces by bringing together the
parts to be welded.
EN
27