Work And Safety Instructions; General; Mechanical System - Festo Contactor board EduTrainer Manual De Utilización

5 Work and safety instructions

5.1 General

•
Trainees should only work with the circuits under the supervision of an instructor.
•
Observe the specifications included in the technical data for the individual
components, and in particular all safety instructions!
• Wear personal safety equipment (safety glasses, safety shoes) when working on
circuits.

5.2 Mechanical system

•
Switch off the power supply!
–
–
–
•
Set all components up so that activation of switches and disconnectors is not made
difficult.
•
Follow the instructions regarding positioning of the components.
© Festo Didactic 8049694
Switch off both working and control power before working on the circuit.
Only reach into the setup when it's at a complete standstill.
Be aware of potential run-on times of the actuators.
CAUTION
WARNING
CAUTION
Contactor board EduTrainer
®
25