Technical Data; Description - Festo Contactor board EduTrainer Manual De Utilización

Contactor board EduTrainer
®

7 Technical data

Technical data, Contactor board EduTrainer
Input voltage
Output voltage
Mains connection
Protective grounding terminal
Protection class
Overvoltage category
Contamination level
Connection
Operating temperature range
Protection
Dimensions (H x W x D)
Weight
Subject to change
Certifications
CE marking according to

8 Description

The Contactor board EduTrainer
(e.g. from the contactor set for motor technology, order no. 571816) in conjunction with the "Fundamentals
of circuits with contacts" training package (TP 1211).
The components can be connected to the 3-phase mains (L1, L2, L3, N, PE), as well as to 24 V and 0 V
control voltage, via 4 mm safety sockets.
30
®
3 ea. 400 V AC / 16 A / 50 Hz
24 V DC / 4.5 A
3 ea. 400 V AC / 16 A / 50 Hz
24 V DC / 4.5 A
Safety laboratory cables per EN 61010-031, min. conductor cross-section: 1 sq. mm
PE+ contact
1, operation with protective grounding
II, operation in building installations
2, laboratory environment
4 mm safety sockets
5 ... 40° C
IP 20
399 mm x 297 mm x 95 mm
Approx. 2 kg
low voltage directive, RoHS guideline
permits the mounting and wiring of a great variety of H-rail modules
®
Warning - electric shock
The EduTrainer contactor board may only be used in combination with the EduTrainer
®
phase power supply (order no. 571812) or equivalent protective device.
3-
®
© Festo Didactic 8049694