Function Operation
Energy Saving: You can set Energy saving function through the button .
Overrun: Click
Overrun time: Press
Temperature maximum setting: You can turn up or down the maximum
temperature by clicking
click ,
a pop window appears. You can choose "apply to all zone" or "apply to one zone". The upper
limits and lower limits of temperature take effect only when temperature limits are applied to the zone. (To
remove upper temperature limit of one zone, set upper limit 30 and lower limit 16)
to turn ON/OFF this function
and
to set the overrun time duration.
or
After setting temperature,
Default is "ON".
40