Installation
Installation conditions
Don't install in place there is noise.
It will not work if it is installed near a computer, auto-door, elevator, or other equipment which produce noise.
Don't install in a place which is damp or prone to strong vibrations as it will fail under such conditions.
Don't install in a place exposed to direct sunlight or near a heat source as it will fail under such conditions.
Firstly, fix the rack on the cassette on the wall. Use both A and B holes if it is 120 cassette, use A and C two
holes if it is 86 cassette.
There are two pothooks on each side of the rack. There are four recesses corresponding to the pothooks on
the back of the central controller.
Installation diagram of the side of the rack
46