GM 84014341 Guia De Inicio Rapido

Warning Triangle Straps Installation
1. Remove the rear load floor per the owner's manual. The
cargo bin is underneath the rear load floor.
2. The cargo bin contains two sets of vertical slots (A1, A2) and
two sets of horizontal slots (B1, B2). Reference Figure 1.
3. The straps contain:
C) Longer LOOP portion of the Velcro.
D) Upper support tab.
E) Lower support tab.
F) Shorter HOOK portion of the Velcro.
4. Fold the lower support tab over and pinch the two layers of
strap and the lower support tab together. Ensure that the
shorter HOOK portion of the Velcro is facing towards you.
Reference Figure 2.
5. Insert the lower support tab into the horizontal slot, B1,
until the lower support tab is all the way through the slot.
Reference Figure 3.
6. Pull up on the strap to ensure that the lower support
tab does not pull back out of the slot. This confirms that
the lower support tab has opened up and is engaged.
Reference Figure 4.
7. Fold the upper support tab over and pinch the two layers of
strap and the upper support tab together. Ensure that the
longer LOOP portion of the Velcro is facing towards you.
8. Insert the upper support tab into the vertical slot, A1, until the
upper support tab is all the way through the slot. Reference
Figure 5.
9. Pull on the strap to ensure that the upper support tab does
not pull back out of the slot. This confirms that the upper
support tab has opened up and is engaged. Reference
Figure 6.
10. Repeat steps 4-9 for slot B2 and then for slot A2. Reference
Figure 7.
11. Place the warning triangle in the space as shown, ensuring
that the Velcro straps wrap around the warning triangle.
Reference Figure 8.
12. Secure the Velcro straps on both sides. Reference Figure 9.
Figure 1
Warning Triangle Straps Installation
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11 01JL16
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
Figure 2
REVISION
Initial Release - Brian Genslak
Figure 3
Figure 5
Figure 7
IR 01JL16
INSTALLATION INSTRUCTIONS
AUTH DR
TITLE
2464932
84014341
PART NO.
Figure 9
84014341
PART NO.
title
SHEET
Figure 4
Figure 6
Figure 8
1 2
SHEET OF
1 2
OF