General Description; Extent Of The Delivery; Overview; Functional Description - Grizzly Tools AKHS 20 Set Traducción Del Manual De Instrucciones Origina

General description

The illustration how to handle the
appliance can be found on
pages 2-3.

Extent of the delivery

Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
- Operating unit
-
Cutter head
- Shoulder strap
- Blade protection for safety blade
- Telescopic tube
- Anti-vibration handle
- 2 x Battery
- Battery charger
- 1 Instruction manual
- 1 Instruction manual recharger and
battery

Overview

1 Blade safety bar
2 Cutter head
3 Quick release lock (for telescopic
tube)
4 Telescopic tube
5 Anti-vibration handle
6 Operating unit
7 Rechargeable battery
8 Handgrip
9 On/off switch
10 Switch lock
11 Operating unit lock
12 Eyelet for shoulder strap
14 Cutting head lock
15 Front handgrip
16 Allen key
17 Shoulder strap
18 Blade guard

Functional description

The AKHS 20 Set is driven by an electric
motor.
Refer to the following descriptions for a
functional description of the controls.

Technical data

Cordless combination
hedge trimmer ...................AKHS 20 Set
Motor voltage (U
max
Weight ...................................approx. 5 kg
Idling rotation speed n
Cutting capacity .............................16 mm
Cutting length .............................. 410 mm
Length of chain bar ......................450 mm
Sound pressure level
(L ) ......................80 dB(A); K
pA
Sound power level (L
measured ............ 89.7 dB(A); K
guaranteed ...............................92 dB(A)
Vibration (a ) ...........4.5 m/s
h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity. Technical and optical changes
may be undertaken in the course of further
development without notice. All dimen-
sions, references and information in this
instruction manual are therefore not guar-
anteed. Legal claims made on the basis of
the instruction manual can therefore not
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
) ...................... 20 V
............ 1150 min
0
=3.0 dB
pA
)
WA
=3 dB
WA
; K = 1.5 m/s
2
GB
-1
2
63