GB
General Description
The illustrations can be found on
page 2.
Scope of delivery
Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
- Cordless hedge trimmer
- Blade guard
- Battery charger
- Battery
- Charger and rechargeable battery
operating instructions
- Instruction Manual
Function Description
The cordless hedge trimmer features a
high-quality knife made from special laser-
cut steel. When trimming, the cutting teeth
move to and fro in a linear shearing mo-
tion. The strike guard at the tip of the knife
prevents unpleasant kickback reactions
when hitting walls, fences, etc. Operators
are protected by the appliance's two-hand
safety switch and quick-stop brake func-
tion. The hand protection guards your
hands against twigs and branches. Read
the sections below to learn more about
each operating element's function.
Overview
1 Strike guard
2 Safety knife bar
3 Hand protection
4 Safety switch
5 Front handle
6 Ventilation slots
7 On/Off switch
58
8 Rear handle
9 Battery
10 Charger
11 Blade guard
12 Suspension
13 Battery release buttons
14 Guide track
15 Release button on rear handle
Technical Data
Cordless
Hedge Trimmer ..................... CH 2000 Li
Motor voltage U ............................ 20 V
Idling speed n
................ 1300 min
0
Runtime ................................max. 45 min*
Cutting length ......................appr. 520 mm
Length of knife .....................appr. 580 mm
Max. cutting capacity .............appr. 15 mm
Weight
(without battery and battery charger) ... 2 kg
Sound pressure level
(L
) ....................... 78.3 dB(A), K
pA
Sound power level (L
guaranteed ...............................92 dB(A)
measured ....... 88.9 dB(A); K
Vibration (a
) ..............................................
h
Rear handle ......... 1.23 m/s
Front handle ........ 2.04 m/s
* The actual runtime under load of a fully charged
battery depends on how you work and on the
load put on the trimmer during operation.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
(rpm)
-1
=3 dB
pA
)
WA
= 3.07 dB
WA
, K=1.5 m/s
2
, K=1.5 m/s
2
2
2