Samsung SCC-B2303 Manual Del Usuario página 34

00424A SCC-B2307P-eng 4/7/05 9:12 PM ˘ ` 34
(AWB/MANU)
E
PRESET
RET
SYNC
The INT mode is necessary for using the internal synchronization and
the LINE... mode is necessary for the operation of multi cameras
because it synchronizes the camera phase by using the external
signal(AC Signal). A little phase deviation for some sets may be aligned
by adjusting the PHASE. The SYNC function is available only with AC
power source. Put the cursor on the LINE..., press the LEFT/RIGHT key
to select the LINE... item, and press the [ENTER] key. Now, you will see
the submenu to adjust the PHASE. The PHASE ranges from -106H to
+106H(NTSC), -138H to +138H(PAL).
CAMERA ID
IRIS
BLC
COLOR/BW
SHUTTER
MOTION
WHITE BAL
SYNC
SPECIAL
EXIT
When you use DC power source, the SYNC Menu is full --- and you can
not use the SYNC function.
34
All manuals and user guides at all-guides.com
press the
[Left/Right]
key
3200K
OFF
ALC...
OFF
COLOR...
AUTO X8
press the
F.FAST
[ENTER] key
ATW
LINE...
...
QUIT
(AWB/MANU)
BURST OFF(USER)--
RED (00) ----I----
BLUE (00) ----I----
RET
(LINE LOCK)
PHASE (000) ----I----
RET