Counting
Purpose
With the Counting program you can determine the number of parts or pieces by
weight.
Example: Determine the number of uncounted parts; calculate the sample
reference quantity (in this example: 20)
Step
1. Select application program
2. Select Counting
3. Confirm application
Symbol " " on the display:
application is active
4. Place empty container on the
balance/scale
5. Zero the balance/scale
6. Place sample reference quantity (20)
on the balance/scale
7. Select sample reference quantity:
in increments of 1 (1, 2, 3, ..., 99) or
in increments of 10 (10, 20, 30, ...,100)
8. Confirm selected sample reference
quantity
9. Place uncounted parts on balance/scale
10. Toggle display between mean piece
weight, total weight, and quantity
11. Unload the balance/scale
12. Start new Count application
or exit application
13. Reactivate Counting (if no other
application program has been selected)
14. Repeat procedure starting from Step 5.
10
All manuals and user guides at all-guides.com
Key (or instruction)
(ZERO) ≥ 2 sec
(F) repeatedly
(ENTER)
(ZERO)
(F) repeatedly (briefly) or
(F) ≥ 2 sec.
(ENTER)
(F) repeatedly
(ENTER) ≥ 2 sec
(F)
Display