Application Programs; Toggling Between Weigh Units - Boeco BEB Serie Manual De Instrucciones

All manuals and user guides at all-guides.com

Application Programs

Toggling between Weigh Units

With this application program you can toggle the display of a weight value back
and forth between two weigh units (see table below).
Example: Toggle weigh unit from pounds [lb] (application) to grams [g] (basic unit)
Step
1. Select application program
2. Select Toggling between Weigh Units
3. Confirm unit of application*
4. Select weigh unit; in this example:
"5. Pounds" (see table below)
5. Confirm weigh unit (pounds)
6. Place sample on balance/scale
7. Toggle weigh unit
Menu code
1. user**
2.grams
(factory setting)
4.carat
5.Pound
6.ounce
7.tryo
8.tl.hon
9.tl.sin
10.tl.ta
11.grai
12.peny
15.tl.ch
22.pdoz
23.newt
* Grams is chosen as 1st unit; to changes 1st unit, see Advanced Features section.
** User-defined conversion can be loaded in balance/scale with RS-232 or USB
program option. Contact BOECO for more information.
Key (or instruction)
(ZERO) ≥ 2 sec
(F) repeatedly
(ENTER)
(F) repeatedly
(ENTER)
(F)
Unit
Grams
Grams
Carats
Pounds
Ounces
Troy ounces
Hong Kong taels
Singapore taels
Taiwanese taels
Grains
Pennyweights
Chinese taels
lb/oz
Newtons
Display
Conversion factor
1.00000000000
1.00000000000
5.00000000000
0.00220462260
0.03527396200
0.03215074700
0.02671725000
0.02645544638
0.02666666000
15.4323583500
0.64301493100
0.02645547175
0.03527396200
0.00980665000
Display
o
g
o
lb
oz
ozt
tlk
tl
tl
GN
dwt
tl
lb:oz
N
9