Display Lock Mode - Boeco BEB Serie Manual De Instrucciones

Display Lock Mode

Purpose
The last stable value remains displayed for 5 seconds after removing the sample
from the pan.
Example: Determine weight of oversized sample
Step
1. Select application program
2. Select Display Lock ("
3. Confirm application
Symbol " " on the display:
application is active
4. If necessary: zero the balance/scale
5. Place sample on balance/scale
6. Start application program
Symbol " " flashes on the display:
when stability conditions are met
7. Unload the balance/scale:
the weight value remains displayed
for a further 5 seconds; or
8. Zero the balance/scale
9. End the Display Lock application
10. Reactivate Display Lock (if no other
application program has been selected)
11. Repeat procedure starting from Step 5.
12
All manuals and user guides at all-guides.com
Key (or instruction)
(ZERO) ≥ 2 sec
HLdon
") (F) repeatedly
(ENTER)
(ZERO)
(F)
(ZERO)
(ENTER) ≥ 2 sec
(F)
Display