All manuals and user guides at all-guides.com
Leveling the Balance/Scale
(only for model BEB43)
§ Always level the balance/scale again
any time after it has been moved to
a different location.
§ Turn the front feet as shown in the
diagram until the air bubble is cen-
tered within the circle of the level
indicator.
§ Lower all feet to touch the counter-
top so the balance/scale does not
rock.
> In most cases this will require
several adjustment steps.
Removing Weights for
Calibration/Span Adjustment
(not for model BEB61)
§ Grasp the tab to turn and pull out the
weight compartment.
§ Always wear gloves or use tweezers
when handling weights.
$ Follow instructions on page 15 for
calibration/span adjustment.
Warmup Time for Model BEB43:
To ensure accurate results, the scale
must warm up for 1 hour before opera-
tion. Only after this time will the scale
have reached the required operating
temperature.
7