Advanced Features (Setup Menu)
Purpose: Serveral advanced balance operations can be changed through menu codes.
Select the desired codes from the list below. Then follow the steps to change the menu codes.
Step
1.
Turn balance off.
2. Turn the balance back on. While all segments
are displayed, press ZERO key once.
3. Increase the number on display to desired value.
4.
Move to the 2nd number of the code.
5. Increase the second number on display
to desired value.
6. Move to the 3rd number of the code (when you
move to the third number, the previously set menu
code will appear).
7. Increase the third number on display to desired value.
8.
Confirm new code
9.
Exit setup menu.
Special Keyfinctions for Menu Code Operation
Key
Press briefly Press and hold
(F)
Increase a number by one with each press
(ENTER)
Moves to the next of three numbers of a code; hold to confirm setting
(ZERO)
Moves to the previous number of a codes; hold to exit set-up.
Parameter Settings (Overview)
Setup
1
Weighing
menu
5. and 6.
8. Additional
functions
9. Reset menu
16
All manuals and user guides at all-guides.com
Key (or instruction)
(ON/OFF)
ZERO
MODE
ENTER
MODE
ENTER
MODE
Hold down the ENTER key until "0" appears after
the desired code.
Press ZERO for more than 2 seconds
ο Factory setting
1.1.
Adapt filter
1.2.
Application filter
1.3.
Stability range
1.5.
Calib./adjust./linearization:
Function of the (CAL) key
1.6.
Auto zero
1.7.
1st weigh unit, or 2nd unit
in Toggle Weigh Units app.
Interface settings; see manual for interface accessory
8.1.
Block key functions
(with battery use only)
8.2.
Automatic shut-off
(with battery use only)
9.1.
Factory settings
Display
1.1.1
Very stable conditions
ο
1.1.2
Stable conditions
1.1.3
Unstable conditions
1.1.4
Very unstable conditions
ο
1.2.1
Final readout
1.2.2
Filling
1.3.1
1/4 digit
1.3.2
1/2 digit
1.3.3
1 digit
ο
1.3.4
2 digits
1.3.5
4 digits
ο
1.5.1
Calibration/span adjustment
1.5.2
Linearization: for service
personnel only
1.5.3
Key blocked
ο
1.6.1
On
1.6.2
Off
1.7.1
User-defined unit: see
to 1.7.23
"Toggling between Weigh Units"
8.1.1
All keys blocked except
for (ON/OFF) and (ZERO)
ο
8.1.2
All keys unblocked
ο
8.2.1
After 2 minutes
8.2.2
After 5 minutes
8.2.3
After 10 minutes
9.1.1
Restore
ο
9.1.2
Do not restore