Boeco BEB Serie Manual De Instrucciones página 6

Connecting the Balance/Scale
to AC Power
!
Use only the AC adapter for
optimal performance and safety.
§
Insert plug into the jack (located
on back of balance/scale)
§
Plug the AC adapter into an
electrical outlet
!
LISTED power supply 11 V–21 V
compliant with NEC Class 2 output.
Below-Balance/Under-Scale Weighing
A port for a below-balance weighing
hanger is located on the bottom of the
balance/scale.
§
Open the cover plate on the
bottom of the balance/scale.
§
Attach the sample (e.g., using
a suspension wire) to the hanger.
$
Install a shield for protection
against drafts if necessary.
6
All manuals and user guides at all-guides.com
Installing the Battery
(not for model BEB43)
$
!
!
§
§
§
$
§
!
Batteries are not included with the
equipment supplied
Use only commercially available
9 V batteries.
If you use a rechargeable battery,
recharge it with an external battery
charger.
Lay the balance/scale on its side
Open the battery compartment:
remove the compartment cover
Install the battery in the compart-
ment
Make sure the polarity is correct.
Close the battery compartment:
slide the cover into position until
it snaps into place
Do not throw away used batteries
with normal household waste.
Rechargeable batteries contain
toxic materials and must be dis-
posed of in accordance with local
waste disposal regulations.