Removing The Cover; Attaching The Seat Covers - CYBEX ATON 3S Manual Del Usuario

36
All manuals and user guides at all-guides.com

REMOVING ThE COVER

The cover consists of 5 parts. 1 seat cover, 1 headrest
cover, 2 shoulder pads and 1 buckle pad. To remove the
cover please follow these steps:
• Open the buckle.
• Remove the shoulder pads from the shoulder belts.
• Pull the headrest cover over the headrest rim.
• Pull the shoulder belts with the buckle tongues out of
• Remove the headrest cover.
• Pull the seat cover over the seat rim.
• Pull the buckle through the seat cover.
• Now you can remove the cover part.
NOTE! Use CYBEX ATON 3S covers only!

ATTAChING ThE SEAT COVERS

in order to put the covers back onto the seat, proceed in
the reverse order as shown above.
NOTE! Do not twist the shoulder straps.
the headrest cover.
WARNING! The child seat must never be used
without the cover.