Dometic WAECO MagicTouch MT200 AU4 Indicaciones Para El Montaje Específicas página 14

_MT200_AU4.book Seite 14 Montag, 19. April 2010 7:26 19
Installing and connecting the MT200
Audi A6
The connection to the power supply is made at the central locking pump. The central
locking pump is located on the passenger seat side under the rear seat bench.
➤ Disconnect the ring sleeves from the following cables of the radio remote
control:
– Red cable
– Orange cable
– Brown cable
➤ Connect the following cables of the radio remote control using piercing connec-
tors (fig. 2, page 2):
– Connect the red cable to the red/grey original cable (rt/gr)
– Connect the orange cable to the black/blue original cable (sw/bl)
– Connect the brown cable to the brown original cable (br)
Audi A8
The connection to the power supply is made at the central locking pump. The central
locking pump is located in the boot behind the side panel on the driver's side.
➤ Disconnect the ring sleeves from the following cables of the radio remote
control:
– Red cable
– Orange cable
– Brown cable
➤
Connect the following cables of the radio remote control using piercing
connectors (fig. 3, page 2):
– Connect the red cable to the red/green original cable (rt/gr)
– Connect the orange cable to the black/blue original cable (sw/bl)
– Connect the brown cable to the brown original cable (br)
14
MagicTouch MT200 AU4