Dometic WAECO MagicTouch MT200 AU4 Indicaciones Para El Montaje Específicas página 18

_MT200_AU4.book Seite 18 Montag, 19. April 2010 7:26 19
Installing and connecting the MT200
Audi Cabrio from 96
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 4, page 3):
– Connect the grey cable to the brown/grey original cable which is located in
the red plug
– Connect the blue/red cable to the brown/green original cable which is located
in the red plug
➤
Lay the black/green cable and the black/white cable of the radio remote control
to the left side panel.
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 9, page 4):
– Connect the black/green cable to the black/green original cable (sw/gn) in the
cable strand which leads to the rear lights.
– Connect the black/white cable to the black/white original cable (sw/ws) in the
cable strand which leads to the rear lights.
Skoda Octavia
The central locking activation is conducted by means of the central locking control
device next to the steering column.
Octavia LX (two plugs in the control device)
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 0 1, page 5):
– Connect the grey cable to the white/yellow original cable which is located on
pin 4 of the 23-pin plug
– Connect the blue/red cable to the black/yellow original cable which is located
on pin 5 of the 23-pin plug
Octavia SLX (one plug in the central locking control device)
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 0 1, page 5):
– Connect the grey cable to the white/blue original cable which is located on
pin 2 of the 23-pin plug
– Connect the blue/red cable to the black/blue original cable which is located
on pin 4 of the 23-pin plug
Octavia SLX and LX indicator activation
➤
Connect the following cables of the radio remote control using piercing connec-
tors (fig. 0, page 5):
– Connect the black/green cable to the black/green original cable (sw/gn)
which is located in the white, 12-pin plug connection next to the central lock-
ing control device.
– Connect the black/white cable to the black/white original cable (sw/ws) which
is located in the white, 12-pin plug connection next to the central locking
control device.
18
MagicTouch MT200 AU4