General Power Tool Safety Instructions - Bosch Professional GSB 13 Instrucciones De Servicio

Operating instructions
General power tool safety
instructions
WARNING! Read all safety warnings and
all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1. Work area safety
a) Keep work area clean and well lit. Clut-
tered and poorly lit areas can result in
accidents.
b) Do not operate power tools in the pres-
ence of flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators and refrigerators. There is an
increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
Robert Bosch Ltda.
manual GSB13_GSB13-RE_v5.indd 17
All manuals and user guides at all-guides.com
3. Personal safety
d) Do not misuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
f) If it is not possible to avoid the use of the
power tool in humid or wet areas, use a
residual current device (RCD) protected
supply. Use of an RCD reduces the risk of
electric shock.
g) In case of change need or substitution
of the electric cable, it should be made
by an authorized and qualified technical
service. A damaged cable increases the
risk of electric shock.
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
if you are tired or under the influence of
drugs, alcohol or medication. A moment
of inattention while operating power tools
may result in serious personal injury.
b) Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the
switch is in the off-position before plug-
ging in. Carrying power tools with your
finger on the switch or plugging in power
tools that are switches on invite accidents.
F 000 622 255 | 02.2008
en | 17
14.02.08 10:26:56