Weighing Units - OHAUS PJX Serie Manual De Instrucciones

EN-26
Balance Setup Menu:
Filter Level is locked at the current setting.
Auto Zero Tracking is limited to 0.5 Division and Off. The selected setting is locked.
Auto Tare is locked at current setting.
Graduations are forced to 1 Division and the menu item is hidden.
Communication Menu (Communication->Print Settings->Print Output):
Stable Weight Only is locked On.
Numeric Value Only is locked Off.
Communication Menu (Communication->Print Settings->Auto Print):
Auto print mode selections are limited to Off, On Stability, and Interval. Continuous is not available.
Lockout Menu:
Menu is hidden
Note: The security switch located at the rear of the balance must be in the locked position to set Approved Mode to
On. The security switch must be in the unlocked position to set Approved Mode to Off. See Section 6.

5.4 Weighing Units

Enter this sub-menu to activate the desired units of measure.
PJX balances provide a choice of 11 units.
Note: Due to national laws, the balance may not include some of the units of measure listed below.
The Unit menu is used to enable or disable a specific unit. (SET ON, SET OFF).
Unit
Gram
Kilogram
Milligram
Carat
Pound
Ounce
Ounce Troy
Pennyweight
Grain
TWTael
Custom1
Changing Weighing Units
1. Press and hold the Print / Unit button until the Unit
Menu is displayed.
Display
g
kg
mg
ct
lb
oz
ozt
dwt
GN
t
c
PJX Series Balance