Scope of Delivery for Prod. No. 72030292
Device WITHOUT battery
-
Cordless hedge trimmer
-
Battery (2.0 Ah)
-
Battery charger
-
Knife guard
-
Instructions for use
The illustration how to handle the appli-
ance can be found on page 2.
Overview
1 Strike guard
2 Safety knife bar
3 Hand protection
4 Safety switch
5 Front handle
6 Ventilation slots
7 On/Off switch
8 Rear handle
9 Battery
9a Battery (2.0 Ah)
9b Battery (4.0 Ah) (optional,
sold separately)
10 Battery release buttons
11 Battery charge state indicator
12 Battery charger
12a Charging indicator
13 Knife guard
14 Guide track
15 Button Battery Indicator
Function Description
The cordless hedge trimmer features a
laser-cut knife of special-grade steel. When
trimming, the cutting teeth move to and fro
in a linear shearing motion. The strike guard
at the tip of the knife prevents unpleasant
kickback reactions when hitting walls, fences,
etc. Operators are protected by the appli-
ance's two-hand safety switch and quick-stop
brake function. The hand protection guards
your hands against twigs and branches.
Read the sections below to learn more
about each operating element's function.
Technical Data
Appliance
Motor voltage ................. 24 V
Idling speed ................. 1300 min
Protection class ...................................III
Cutting length ............................520 mm
Length of blades........................562 mm
Cutting capacity...........................15 mm
Weight (with Safety knife bar,
without battery charger) ............. 2.48 kg
Sound pressure level
(L
) ..........................83 dB(A), K
pA
Sound power level (L
guaranteed............................96 dB(A)
measured ........... 93 dB(A); K
Vibration (a
) ..........................................
n
Rear handle ...........2.1 m/s
Front handle ............2.5 m/s
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. Technical and optical
changes may be undertaken in the course
of further development without notice. All
dimensions, references and information in
this instruction manual are therefore not
guaranteed. Legal claims made on the ba-
sis of the instruction manual can therefore
not be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
GB
2.0 Ah
(rpm)
-1
= 3 dB
pA
)
WA
= 3 dB
WA
; K=1.5 m/s
2
; K=1.5 m/s
2
21
2
2