Special Safety Directions - Grizzly AHS 2420 Lion Traducción Del Manual De Instrucciones Original

GB
If devices are provided for the con-
•
nection of dust extraction and col-
lection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
4) POWER TOOL USE AND CARE
• Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do
the job better and safer at the rate for
which it was designed.
• Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous and
must be repaired.
• Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any ad-
just -ments, changing accessories,
or storing power tools. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
Store idle power tools out of the
•
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dan-
gerous in the hands of untrained users.
• Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean.
•
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
24
Use the power tool, accessories
•
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
6) SERVICE
• Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.

Special Safety Directions

1) SPECIAL SAFETY DIRECTIONS
FOR HEDGE TRIMMERS
• Keep all parts of the body away from
the cutter blade. Do not remove
cut material or hold material to be
cut when blades are moving. Make
sure the switch is off when clearing
jammed material. A moment of inatten-
tion while operating the hedge trimmer
may result in serious personal injury.
Carry the hedge trimmer by the han-
•
dle with the cutter blade stopped.
When transporting or storing the
hedge trimmer always fit the cutting
device cover. Proper handling of the
hedge trimmer will reduce possible per-
sonal injury from the cutter blades.
• Hold the power tool only on the insu-
lated handle surfaces, as the cutting
blade may come into contact with
concealed power cables. Contact be-
tween the cutting blade and a live cable
may render metallic components live
and result in an electric shock.