Technical Data; Notes On Safety; Symbols In The Manual - Grizzly EHS 900 L Traducción Del Manual De Instrucciones Original

Technical Data

Motor
Input voltage rating.......230-240 V~, 50 Hz
Input power ......................................900 W
Safety class .........................................
Degree of protection
Long-reach hedge trimmer:
Cutting length ...................... 410 mm
Cutting capacity ............................... 20 mm
Weight (without cable) ................... 6,22 kg
Acoustic pressure level
(LpA) .................89,2 dB(A); KpA = 3 dB(A)
Sound power level (LwA)
measured .......95,86 dB(A); KwA = 3 dB(A)
guaranteed ....................................99 dB(A)
Vibration
at the handle ............................. 2,750 m/s
at the round handle ................... 4,540 m/s
Long-reach chain saw:
Chain speed v ...................... max. 11 m/s
0
Length of the chain bar .......240 mm
Oiltank ............................................120 ml
Blade .......................Oregon 080SDEA041
Sawing chain ..................Oregon 91P033X
Weight ............................................. 5,0 kg
Acoustic pressure level
(L ) .................88,18 dB(A); K
pA
Sound power level (LwA)
gemessen ..... 101,85 dB(A); K
garantiert ................................... 104 dB(A)
Vibration (a )
n
at the handle ..............................2,743 m/s
at the round handle ....................4,710 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
..........................IP 20
K = 1,5 m/s
= 3 dB(A)
pA
= 3 dB(A)
WA
K = 1,5 m/s
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
II The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may differ
during actual use of the power tool from
the stated value depending on the manner
in which the power tool is used.
Safety precautions aimed at protecting
2
the user should be based on estimated
2
exposure under actual usage conditions
2
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).

Notes on Safety

This section deals with the basic safety
regulations to be observed when working
with the electric hedge trimmer.

Symbols in the manual

Warning symbols with informa-
2
tion on damage and injury pre-
2
vention.
2
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
GB
119