Changing The Light (Optional) - Candy CCTOS 502WHN Manual Del Usuario

4. Unscrew the upper hinge screws and remove the upper hinge
5. Remove the door, unscrew the bottom hinge screws and remove the bottom hinge. After this, level
the feet.
6. Fix the leveling feet, and the bottom hinge on the opposite side
7. Assemble the door stopper and the axle sleeve on the opposite side
8. Put down the door on the bottom hinge vertically. Fix the upper hinge and the top cover of the
refrigerator

Changing the Light (optional)

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its
service agent or similar qualified person.
Replacement of incandescent lamps:
Disconnecting the power supply before carrying out the bulb replacement
•
• Hold and remove the light bulb cover.
• Dismantle the old bulb by unscrewing ii counterclockwise.
Replace by a new bulb (Max. 15W) by screwing ii clockwise, and make sure it is fixed in the
•
bulb holder lightly.
• Reassemble the light cover and re-connect your Fridge to the power supply.
18