Publicidad
Idiomas disponibles
Idiomas disponibles
(See fig. 7)
To fine tune the fit of your gate screw the upper hinge bar (D) into the upper corner of your
gate to a distance that will leave your gate central in your doorway. Screw the lower hinge
bar (H) an equal distance into the lower corner. Hang the gate on your hinges.
Screw the upper bar into the upper corner of your gate until it sits securely in the upper
catch (B) when the gate is closed, secure the nut with the spanner provided. Repeat with
the lower bar (G) in the lower corner. Ensure your gate hangs level and upright and that the
space between the gate frame and your wall is no greater than 6 cm. To compensate for an
uneven wall or skirting board all 4 corners of the gate can be independently adjusted.
fig. 7
D
B
MAX 6cm
G
Once the safety gate is installed, please read the instructions again and check the safety
gate is correctly fitted and secure.
5
D
E
MAX 6c m
H
I
using your mothercare safety gate
(See fig. 8)
To open your gate: Press down on the upper catch with your thumb and lift the upper bar out
of the catch.
To close your gate: Simply lift the gate back into the catches. The upper catch will automatically
lock the gate in the closed position. Ensure the upper and lower bars are correctly seated in
the catches.
fig. 8
Check the fitting of your gate daily to ensure it remains securely fixed and that all
attachments and locking devices are operating correctly.
6
Publicidad
