Installation
Removing the protection collar
and the bracket
Before installing the unit, remove the
protection collar and the bracket from
the unit.
1
Pinch both edges of the protection
collar , then pull it out.
2
Insert both release keys until they
click, and pull down the bracket ,
then pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the
dashboard
• Before installing, make sure the catches on
both sides of the bracket are bent
inwards 2 mm (
3
/
32
• For Japanese cars, see "Mounting the unit
in a Japanese car" (page 40).
1
Position the bracket inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2
2
Mount the unit onto the bracket ,
then attach the protection collar .
Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
are properly engaged in the slots of the unit.
in).
182 mm (7
1
/
in)
4
1
/
in)
8
Catch
39
GB