GE 26936 Guia Del Usuario página 8

5. Connect the power supply cord
into jack on the back of the unit.
Then thread it through the
bottom of the base.
6. Slip the mounting holes over
the wall plate posts and slide
the unit down firmly into place.
(Wall plate not included.)
7. Plug the power supply into an
AC outlet.
8. Raise the base antenna.
9. Place the handset in the base.
The CHARGE/IN USE indicator
comes on, indicating the battery
is charging.
Allow the phone to charge
for 12 hours before using
the first time. If you don't
charge the phone properly
when you first set up the
phone, performance of the
battery will be
compromised.
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see "Tone/Pulse Dialing." If you don't know which type
of service you have, check with the phone company.
CAUTION: Use only the ATLINIKS 5-2470 (black)/5-2485 (white)
power supply that is compatible with this unit. Using other power
supplies may damage the unit.
8
All manuals and user guides at all-guides.com
8
5
6
7