Preventing The Risk Of Fatal Injuries; Preventing Explosion Hazards; Preventing Risks Of Injury; Preventing The Fastener Driving Tool From Being Damaged - Prebena 3X-CNW50 Manual De Instrucciones Original

Preventing the risk of fatal injuries


Never point the fastener driving tool at people, animals or their body
parts.

The fastener driving tool must only be triggered when the tool tip
is pressed against the workpiece.

Do not allow children to play with the packaging film, as there is a danger
of asphyxiation.

Make certain the fastening elements are not driven into power lines.

Preventing explosion hazards


Do not use the fastener driving tool in places subject to a danger
of explosion.

Never operate the fastener driving tool with oxygen or with any other
flammable gases or gas mixtures.

Do not expose the compressor to any temperatures above 100 °C.

Preventing risks of injury


Keep the fastener driving tool where it is inaccessible for children
and other unauthorized persons.

Disconnect the fastener driving tool from the compressed air supply
every time before transporting it.

Wear safety goggles, hearing protection and sturdy work clothes
when operating the fastener driving tool.

Hold the fastener driving tool so that you cannot be injured
by a possible recoil.

Use the fastener driving tool only when you have a secure footing.

Preventing the fastener driving tool from being damaged


Never open the housing of the fastener driving tool. Always have repair
work done by a qualified specialist.

Do not use the fastener driving tool if it has been dropped or is damaged.
Have the fastener driving tool checked by a qualified specialist before
it is placed in operation again.
Safety
7