Danger Of Freezing; Maintenance; Removing The Casing; Troubleshooting: Problems And Solutions - Beretta Fonte 11 AE Manual De Instalación, Uso Y Mantenimento

ENGLISH
EN
The device is built to function with normal water pressure; in addi-
tion a temperature selector B is also supplied.
Rotate the knob completely to the left to obtain the maximum wa-
ter output or completely to the right for the minimum water output.
The machine is switched off by rotating knob A to the (
position.
When the water heater is not used for long periods close the gas
supply tap or the LPG gas valve on the tank.
For the best operational results it is recommended to have a quali-
fied technician service the machine at least once a year.
Gas economizer
The device is equipped with a gas economizing device which is
used to choose the temperature of the water so it may be supplied
at the temperature necessary while saving gas.
The economizing device is activated by turning the knob A until it
reaches the picture of the small flame (MIN
nomizer limits the amount of heating when the hot water usage
is modest (water supplied is already warm or there is a reduced
usage, for example in summer).

DANGER OF FREEZING

If there is a possibility that the area where the device is stalled
could reach below 0°C, the device must be emptied of all water
contained.
All manuals and user guides at all-guides.com

4. MAINTENANCE

To maintain the machine at maximum efficiency, have qualified
personnel perform a maintenance check at least once a year.
Before cleaning or performing maintenance, opening or disassem-
l
OFF)
bling the panels, switch off the device and turn off the gas supply.
Check the main burner and the pilot flame, the ignition electrode,
the safety valve and that there is no leakage. Check that there
is nothing obstructing the passages within the exchanger smoke
channel.
To clean the outside of the panels utilize a cloth with soap and
water.
Do not use solvents, powders or abrasive sponges.
Do not clean the device and/or its parts with flammable materials
(e.g. petrol, alcohol, diesel etc.).
4.a Removing the casing (Fig.17)
). Using the eco-
To remove the outer casing follow the steps below (fig. 17):
a remove the selector Knobs (A and B)
b remove the screws (C)
c shift the casing upwards to free it from the upper and lateral
d shift the casing forwards
e to reinsert the casing, follow the above steps in reverse order
4.b Troubleshooting: Problems and solutions
For the best functioning of the water heater, to prolong its lifetime
and ensure that it is always safe, ensure that it is inspected at least
once a year by a trained professional. The trained professional is to
perform the following maintenance operations:
– remove any rust from the burner
– remove any deposit on the glow plug by the electrode
– clean the combustion tank
– check the ignition, switching off and general functionality of the
– Check that the gas and water tubes and connections are sea-
Warning: the flowing repair instructions are only to be performed
by qualified and authorized technicians
14
hooks
device
led