Task 7: Creating Logical Drives With Webpam Proe; Logging Into Webpam Proe; Initial Connection; Secure Connection - Promise Technology Vess R2000 Serie Guia De Inicio Rapido

TASK 7: CREATING LOGICAL DRIVES WITH
WEBPAM PROE
Setting up WebPAM PROe consists of the following actions:
•
Logging into WebPAM PROe
•
Choosing a Language
•
Creating Your Logical Drives
•
Logging out of WebPAM PROe
•
Using WebPAM PROe over the Internet

LOGGING INTO WEBPAM PROE

1. Launch your Browser.
2. In the Browser address field, type the IP address of the Vess R2600 subsystem.
3. The initial HTTP connection is automatically redirected to a secure HTTPS connection.
Use the IP address you obtained in Task 7 (see "Task 6: Setting the IP Address". Note that the IP
address shown below is only an example. The IP address you type into your browser will be
different.

INITIAL CONNECTION

•
WebPAM PROe uses an HTTP connection
• the Vess R2600's IP address
Enter
•
Together, your entry looks like this:

SECURE CONNECTION

•
WebPAM PROe uses a secure HTTP connection
• Enter the Vess R2600's IP address
Together, your entry looks like this:
Note
Whether you choose a regular or a secure initial connection, your login to
WebPAM PROe and your user password are always secure.
All manuals and user guides at all-guides.com
http://
10.0.0.1
http://10.0.0.1
https://
10.0.0.1
https://10.0.0.1
33